Maintenance Skills for Automobile Headlamps
Published:
2023-02-23
Source:
Author:
Car headlights are also called car headlights. Driving at night requires headlights. The brightness, focal length, and irradiation distance of headlights are related to the driver's safe driving, so it is necessary to maintain automotive headlights.
First of all, if the headlamp is damaged, it needs to be replaced. Choose a bulb with quality assurance. The quality of a bulb directly affects the brightness, compactness, and lighting stability of a lamp. If the lights are bright enough or stable when driving at night, it is easy to cause traffic accidents, according to the driver's style. Although inferior bulbs are cheap, they have a short lifespan and require frequent replacement. Therefore, it is recommended to buy warranty bulbs, such as xenon lamps, with a life cycle of 2500 to 3000.
Then, regularly inspect and replace the lighting. Regularly check the brightness of lighting, open the lighting angle, etc. Go to the 4S store to check the brightness of the lighting, or feel good when driving. If you think the brightness is enough, try adjusting it. The light is loose and the brightness drops back. Turn the light up. If it gets dark, replace the bulb.
Lighting must be replaced regularly. Due to the presence of a lamp, the brightness of the lamp gradually decreases over time. Therefore, if the bulb is really bright enough to affect normal driving, it is recommended to replace the bulb. Also, according to the angle of the lamp, it is best represented by maintaining the illumination of the lamp. If the bias illumination affects the formula worst, the lighting must be adjusted. After adjusting the angle higher, it is good to switch between the low beam and high beam lights. Observe if there are any problems.
High internal height. It is recommended that if it is necessary to replace the lighting bulbs, replace the lighting channels on both sides, and replace the bulbs with the same wattage, so that the brightness on both sides is zero.
Latest News
Maintenance Skills for Automobile Headlamps
Car headlights are also called car headlights. Driving at night requires headlights. The brightness, focal length, and irradiation distance of headlights are related to the driver's safe driving, so it is necessary to maintain automotive headlights...
2023-02-23
Application of Damping in Automotive Interior Trim
Damping - Components used to control product motion. The physical friction and fluid resistance between components are controlled through technical debugging to achieve the effect of mitigating product movement. Common forms include damping gears, shaft type damping, and buffers. The appearance of damping varies depending on the structure and installation position. Where is damping used in automotive interior components? Usually, we cannot see it, and damping is mostly hidden. They are installed in the eyeglass box on the front of the car, in the eyeglass box of the reading lamp, on the auxiliary instrument (floor box, or armrest), in the handle of the ceiling (sunroof), in the ashtray damping, in the charging plug damping, and in the glove box damping. When damping is not installed or fails, the experience of using these products may deteriorate, such as excessive speed or noise.
2023-02-23
Precautions for various automotive components
The engine piston temperature is too high, which can easily lead to overheating and melting, resulting in cylinder seizure; Rubber seals, triangular tape, tires, etc., are prone to premature aging, performance degradation, and shortened service life due to overheating; The coils of electrical equipment such as starters, generators, and regulators are overheated and easily burned out and discarded.
2023-02-23